Machine all Counter bore Surfaces in a Fraction of the Time!
The K-Line® 50000 Counter Bore Cutting Tool is a precision instrument designed to re-surface the counter bore ledge and provide the correct cylinder liner protrusion for the engine cylinder liner.
- No special bases required.
- The procedure can be performed with the engine in or out of the chassis.
- Does not require the operator to apply any downward force. Spring Plungers located in the Base Assembly apply all the downward pressure that the tool requires.
- No power tools required. Tool rotation is done by hand only.
- Set the tool one time and resurface all counter bores for the entire engine block.
CONTENTS:
| PART # |
DESCRIPTION |
QTY |
| AT50001A |
Cutter Assembly Ø 5.346" |
1 |
| AT50002 |
Base Assembly |
1 |
| AT50000-1 |
Bolt Spacers |
2 |
| AT50000-2 |
Stop Collar |
1 |
| AT50000-5 |
Torx Wrench |
1 |
| AT50000-6 |
T-Handle Allen Wrench |
1 |
| AT50000-8 |
Foam Plugs for Cutter |
3 |
| AT50000-12 |
Shim Set |
4 |
| AT50001A-6 |
Carbide Insert |
1 |
| AT50001A-7 |
Insert Screw |
1 |
OPERATING INSTRUCTIONS (pdf)
